• contato@wtindustria.com.br
  • +55 (16) 98184-4902

Subscribe to our newsletter

@



Products / Furnaces

Horizontal tube furnace with controlled atmosphere up to 1200°C

This device is a bipartite horizontal tube furnace for utilization with fused silica tube as the experimental cavity. The possibility of building several hot zones (according to the customer´s needs) is available in this high temperature furnace. The maximum working temperature is 1200°C. The furnaces shown in the image presents 2 and 3 hot zones, respectively. They are furnaces for temperature operation up to 1200 °C degree. We manufacture furnaces for diverse purposes, including those for laboratories. Our furnaces use heating elements from the best brands. Our ovens use resistances from the best brands.

- Technical assistance from WT Indústria


Thermal Profile - Horizontal tube furnace with controlled atmosphere up to 1200°C


Horizontal tube furnace with controlled atmosphere up to 1700°C

This device is a 1700°C resistive furnace. This furnace is tubular, horizontal, hermetic, for thermal treatment of samples. An alumina tube is located in the interior of the tube and is used as the experimental cavity. The furnace may be used with controlled atmosphere (the flanges located at the ends of the tube guarantee hermetic closure and have connections that allow the circulation of the chosen gas). In addition, the furnace may also be used with a vacuum inside the experimental cavity. This furnace also features a shielded instrumentation thermocouple inside the tube, in order to monitor both the temperatures of the samples and that inside the tube.
Our furnaces use heating elements from the best brands.

- Technical assistance from WT Indústria


Chamber furnace with controlled atmosphere up to 1700°C

This device consists of a vertical heated hermetically sealed chamber furnace for thermal treatment of samples under controlled atmosphere or vacuum. The lower access to the interior of the heating chamber is allowed by moving a platform positioned at its base. This equipment allows the dimensioning of the heating chamber according to the needs of the researcher, since the atmosphere control is done in the entire heating chamber and not only in a tube as in the tubular furnaces.
Our furnaces use heating elements from the best brands.

- Technical assistance from WT Indústria


Furnace for ionic conductivity measurements

This device consists of a furnace for heating a sample from ambient temperature up to 150°C. It has a forced ventilation system, which favors its cooling to the ambient temperature and optimizes the thermal cycles of conductivity measurements.
Our furnaces use heating elements from the best brands.

- Technical assistance from WT Indústria


Vertical tube furnace for spray pyrolysis

This device consists of a tubular furnace with a top inlet for connecting the device for droplet production and also opening for gas flux. The heating chamber is composed of two hot zones, with individual temperature control for each one. A lower support allows the placement of a container for the collection of the material that will pass through the oven.

- Technical assistance from WT Indústria


Furnaces for use of instrumentation

This device consists of a vertical furnace, with an instrumentation platform on the upper side of the furnace. The working temperature ranges from ambient up to 1600°C. This furnace allows lower access to the inside of the heating chamber through the manual movement of a platform in its base, which allows the insertion of samples for thermal treatment. This furnace also presents an upper platform which allows the utilization of instrumentation that will access the inside of the furnace via an aperture in the upper cover. The upper instrumentation platform may go up and down, in addition to turning on the axis of fixation itself.
Our furnaces use heating elements from the best brands.

- Technical assistance from WT Indústria


Furnace for reactor heating

This furnace heats a reactor positioned in a fixed support. This device presents vertical displacement system that allows the reactor to enter the upper flange through a hole. A manual locking system keeps the furnace in proper position to heat the reactor.
Our furnaces use heating elements from the best brands.

- Technical assistance from WT Indústria


Tubes with refrigerated flanges for instrumentation inside furnaces

This device consists of a fused silica tube with refrigerated flanges in the ends of the tube, for hermetic Seal. Each flange presents hose connection for gas flux inside the tube. One flange presents thermocouple input (to monitor the temperature inside the tube) with a hermetic seal.
Our furnaces use heating elements from the best brands.

- Technical assistance from WT Indústria


Horizontal tube furnace 1200°C for instrumentation

This device presents windows in the ends of the flanges. They allow the entirely observation of the interior of the tube during the test realization. Besides that, the flanges present openings for instrumentation (e.g., electrodes), with sealing for utilization of controlled atmosphere/vacuum.
Our furnaces use heating elements from the best brands.

- Technical assistance from WT Indústria


Molds for glass fusion

Molds for glass fusion to be used in research laboratories.

- Technical assistance from WT Indústria


Special Furnace for Reactor

High Temperature Bipartite Vertical Furnace WT Industry for Reactor. Included reactor support. Request technical specifications.

- Technical assistance from WT Indústria


High Temperature Special Furnace

High Temperature Bipartite Vertical Furnace WT Industry. This furnace may be coupled to universal testing machines. Request technical specifications.

- Technical assistance from WT Indústria


Universal Temperature Controller

Universal Temperature Controller WT Industry. The model shown is a temperature control used in resistive heating systems of 220V with maximum Power of 2200W. Voltage and Power may be designed according to our customer needs.

- Technical assistance from WT Indústria


Heating Vessel

Heating Vessel WT Industry indicated for hydrothermal reactor, Teflon vessel or Inox vessel.

- Technical assistance from WT Indústria



contact

Tel.: +55 (16) 98184-4902
contato@wtindustria.com.br